SoftShell "Basalt" trousers

Tactical trousers made of insulated membrane softshell in a set to the "Basalt" SoftShell Jacket. They are adapted for use by armed professionals both in the field and in urban conditions, but can also be used for outdoor activities. Designed for cold weather, perfectly protect from wind and light precipitation (seams are not glued)

The zippers of all the pockets are tractor ones. The locks are equipped with convenient handles made of braid

The belt with an inflated waist at the back, is trimmed with soft velour from the inside. It is fastened with a button, a codpiece with a twisted zipper. Six large wide belt loops for the trouser belt (up to 50 mm wide inclusive). On the front and back pair there are loops on top for fastening universal suspenders or any similar suspenders (with 4 attachment points to loops 25 mm wide)

Gusset for freedom of movement

Articulated knees with tucks

Side undercut pockets with an open entrance. Soft velour burlap

Large cargo pockets with a sloping entrance with a zipper, covered with a strap. Inside are sewn flat pockets for small things

On the right side there is a rear welt pocket with a zipper, covered with a strap. Soft velour burlap

At the bottom of the trousers, the inner cuffs are made of thin fabric with an elastic cord with a Duraflex® lock, tightly worn over the boot tops. At the same time, the bottom of the pant leg hangs freely, protecting it from getting dirt into the shoes

The loaded sections are reinforced with zigzag fasteners

Material:

• Insulated membrane softshell (laminate made of external protective fabric, membrane layer and thin fleece)
• The density of the material is 231 g/^m2
• Outer fabric — 100% nylon, 70dx70d
• Membrane-micropore laminate (100% polyurethane)
• Insulation-multifilament microfleece with anti-pilling (92% polyester, 8% nylon)
• Water resistance — 10000 mm of water column
• Vapor permeability-10000 g/m ^2/24 h (according to the B1 method)
• Water-repellent DWR surface treatment
• Elasticity in two directions

Auxiliary material (burlap pockets and interior trim):

• Thin fabric, similar to the outer layer of the main material

Attention!In the colors of MOSS and MULTIPAT, there may be a difference in the tone of the fabric depending on the batch of products, which should be taken into account when purchasing a Jacket + Trousers set. When ordering a set through the online store, please leave a comment about the need to check the shades.