Winter Camouflage Suit "White"

An upgraded version of the camouflage winter suit, taking into account the wishes of users. The suit does not have any pockets in principle, instead, button-down slots are used to access the pockets of the clothes and equipment worn under the suit. The cut is very loose, taking into account the wearing of thick winter clothing, bulletproof vests and unloading systems with pouches. The new model focuses on the fabric that is optimal for climatic conditions and camouflage, simplifying and facilitating the design and increasing reliability.Production has been discontinued, the model has been replaced with a winter white moss camouflage suit.

Endurance:

• for reasons of reliability, the entire suit is assembled with chain-stitch stitches (in the lock). All buttons are Canadian (with a ribbon leg)

Simplifying the design:

• the whole suit is sewn in one layer of fabric. The mesh lining is removed, as on the old model, there are no reinforcing pads on the knees and elbows. This allows you to reduce the weight, volume during packaging, and facilitate drying

Adjustment:

• the belt of the trousers is sewn with a wide elastic band, additionally for the reliability of holding there is a cord with a push-button regulator (if necessary, you can remove it)
• the cords for adjusting the hood and the bottom of the jacket are now elastic for greater convenience, with push-button controls. The adjustment is removed from the waist as unnecessary. The lower cord and the regulator can be completely removed if necessary
• the bottom of the trousers and the cuffs of the jacket are sewn with an elastic band

Slots:

• on the chest on the sides there are two long sloping slits, each is fastened with three Canadian buttons, which allows you to adjust the length and position of the slits in height. They provide free access to clothing pockets and various types of unloading platforms — vests, bibs, RPS pouches
• on the trousers in the new model, long slits have been added at the top on the sides, fastened with one Canadian button. The slot can be used to access the pockets of trousers worn under a camouflage suit, hip platforms (holsters) , etc.

The rest:

• the jacket is fastened with a double-sided zipper, on top of the strap with Canadian buttons

Product material (new fabric):

• Quick-drying 100% polyester, density 125 g / ^m2
• A surface with a small fleece that eliminates rustling
• The water-repellent treatment of Teflon Dupont withstands at least 50 washes with a decrease in efficiency of about 20%
• Dense weaving with a small thickness and weight, therefore, unlike many analogues, dark clothing and equipment worn under the suit does not shine through
• The fabric does not harden in the cold
• Unlike the old model and some analogues, it does not have calendering or a film coating on the inside, as a result, the fabric breathes and condensation and excess heat does not accumulate under the suit

Product weight:

• 48-50/170-176 r-r-750 g