Trousers "Storm" V. 2 Membrane
Membrane (HardShell) trousers of increased strength. Adapted for use by armed professionals, but can also be used for outdoor activities
Attention! These trousers are not the sixth layer of military multi-layer clothing systems (a lightweight and simplified set transported in a backpack in case of precipitation), but are a full-fledged product by design for permanent wear
A loose fit that takes into account the possibility of wearing over warm thermal underwear
Reinforcements from Cordura® 320d in places subject to wiping are not overlays on the main fabric, but are used instead of it, having the same membrane on the wrong side
All the main zippers are tractor splash — proof. Unlike the common splash-proof twisted ones, they have greater strength and are much easier to unbutton (including at very low temperatures). The locks are equipped with convenient handles made of braid
A particularly strong nylon thread COATS Nylbond is used (designed for equipment). All the main seams have additional stitching. The loaded sections are reinforced with zigzag fasteners . All seams are taped
A belt with a high waist at the back, trimmed from the inside with soft velour. It fastens with a button and a metal hook, the fly under the strap with a twisted zipper. Six large belt loops for the trouser belt (up to 50 mm wide inclusive), on the front and back pair there are loops on top for attaching universal suspenders or any similar suspenders (with 4 attachment points to loops with a width of 25 mm)
Gusset for freedom of movement. Made of Cordura® 320d
Seat area made of Cordura® 320d
Articulated knees with tucks, reinforced with Cordura® 320d fabric
Single-lock ventilation zippers on the outside of the hips
There are no back and side pockets in principle, because they can be overlapped by a jacket and a backpack/RPS belt. There are two large cargo hip pockets with a zipper
Side zippers at the bottom of the trousers (up to the knees) for easy wearing with shoes. From the inside, these zippers are covered with slats at the full height, there are button fasteners at the bottom that remove the load from the zippers
The bottom of the trousers is pulled by an elastic cord with adjustable Duraflex ® clamps. Cordura® 320d protective inserts on the inside of the trousers
Materials:
Main fabric:
- 100% nylon, 140dx320d
- The density of the material is 189 g/m2
- Hydrophilic PU membrane, three-layer (3L) construction
- Water resistance — 10000 mm of water column
- Vapor permeability-10000 g/m 2/24 h (according to the B1 method)
- Water-repellent DWR surface treatment
Reinforcing fabric:
- 100% nylon, Cordura® 320d
- The material density is 220 g/m2
- Hydrophilic PU membrane, three-layer (3L) construction. Similar to the main fabric
- Water resistance — 10000 mm of water column
- Vapor permeability-10000 g/m 2/24 h (according to the B1 method)
- Water-repellent DWR surface treatment
There are no reviews for this product.