Jacket "SAS-3"
Field demi-season jacket (smok) with a windproof lining.
The loose cut allows you to tuck in the warming layers of clothing
All external zippers are tractor zippers. The locks are equipped with convenient handles made of braid
Sleeve with an articulated cut. The elbows are reinforced with simple overlays made of Cordura® 320d fabric (100% nylon). Installation of shock-proof inserts is not provided!
Sleeve pockets with a vertical zipper entrance, the zipper is covered with narrow symmetrical straps on the outside. A thin profile. There is a fold at the back for volume. Velcro fasteners for attaching chevrons (10x15 cm)
The cuffs are adjustable with Velcro patches
The collar and hood are a single whole. A small visor with a rigid plastic reinforcement along the edge to maintain the shape. Hood adjustment in three dimensions: tightening around the face with an elastic cord with Duraflex ® retainers (the extra ends of the cord are brought out of the base of the collar for quick adjustment), rear vertical adjustment with a Velcro patch, tightening around the head with an elastic cord with a Duraflex® retainer (retainer on the back of the head). A hanger is sewn into the base of the collar from the outside at the back.Attention! The hood is not designed for use with a helmet
The central zipper is of a large type, two — lock. From the inside, the zipper is covered with a narrow bar at full height. External strap with Velcro
The bottom of the jacket is pulled by an elastic cord with adjustment by two Duraflex® latches in the front
Waist tightening with an elastic cord with adjustment by two Duraflex® latches in the front, the extra ends of the cord are brought out
There are Velcro straps on the chest for attaching name ribbons (13x2. 5 cm)
Two roomy chest pockets of the "Napoleon" type with a vertical zipper entrance. The zippers are covered from the outside with slats
Four large front pockets (two chest pockets and two lower ones). On a large Canadian button (on a ribbon leg), with an inflection of the entrance to protect the small contents from falling out. A semi-ring of synthetic cord is sewn into the base of each valve for attaching safety cords, retractors, carabiners, etc.
Two internal flat pockets with an entrance on a thin twisted vertical zipper
All main seams are double-stitched for reliability. All loaded places are reinforced with zigzag fasteners
Material:
- Main fabric:NYCO Rip-stop, 50% cotton, 50% nylon. The density is 220 g/m2. Standard mixed fabric for summer military uniforms. It surpasses the more common version of polyester and cotton in a number of parameters. With water-repellent DWR surface treatment
- Reinforcing fabric:Cordura® 320d, 100% nylon. The density is 190 g/m2. Durable fabric without PU coating on the inside (breathes), with water-repellent DWR surface treatment
- Lining fabric:100% polyester 30d. The density is 48 g/m2. Thin lightweight fabric with calendering on the inside
There are no reviews for this product.