Jacket L3 "Tactical" High Loft V. 2

A fleece jacket is the third layer of military multilayer clothing systems (analogous to ECWCS, PCU, VKPO), made of similar materials. It is used as an intermediate insulation, as well as as external clothing (in the absence of wind). The second generation of the "Tactical" Polartec® High Loft™Jacket

The jacket implies a tight fit on the figure, in contrast to the baggy cut of the statutory military models

High collar, reinforced with fabric on the outside to maintain shape and protect from the wind. A hanger loop is sewn on the inside

The central clasp is a single-lock tractor plastic zipper SBS with a braid grip, covered from the inside along the entire length with a windproof strap that bends outward from the top to protect the neck and chin from chafing

Raglan sleeve — there are no seams on the shoulders, the freedom of movement of the hands is not restricted. Shoulders and elbows are reinforced with pads to protect against rubbing

Gussets made of lightweight fleece fabric under the armpits for ventilation

Soft elastic cuffs made of lightweight fleece fabric fit the wrists well, do not allow the sleeves to bulge

Two external hand pockets on SBS tractor plastic zippers with braid grips. The location is slightly overstated so that the pockets do not overlap with the belts of backpacks and RPS. The burlap is made of lightweight mesh for ventilation. The same burlap on the inside of the jacket forms simple pockets for drying things (gloves, socks, hats, etc.) with a rubberized open upper entrance

The bottom of the jacket is pulled by an elastic cord, adjustable on the sides by clamps. The back of the jacket is elongated

All the main seams are flat

Material:

• Main fabric: an analog of Polartec® High Loft™, elastic fleece with a characteristic "shaggy" pile and a sparse woven base. It has the best ratio of high thermal insulation to low weight, breathes perfectly and is packed in a small volume. A side effect is easy blowing, so in windy weather it is recommended to wear under the upper windproof, softshell or membrane layer
• Auxiliary fabric: Polartec®analog Power Grid™, very elastic (in two directions) fabric, smooth on the outside and with a thin fleece on the inside. The fleece layer is thinned by channels that improve ventilation, which is why it has a specific "waffle" appearance
• Reinforcing fabric: Double Weave, 90% nylon, 10% spandex Non-insulated non-membrane softshell, with Double Weave. Elastic (in two directions) thin fabric with high strength and windproof properties