Combat Shirt

The shirt is designed for use in hot weather in combination with a bulletproof vest. The torso is made of thin sweat — wicking knitwear and has no unnecessary interfering details (pockets, etc.), and the sleeves are made of standard durable mixed fabric.Attention! This shirt does not have fire-resistant properties. Since 2021, the shirt is sewn from the new Kinetix Quick Dry Bamboo jersey, similar to the Alloy used in the first layer of military multilayer systems (L1 "Agate")

Tight fit on the figure. It is worn over the head, worn to the gas station

The torso is fitted, with a margin of length, the back is elongated — it does not get out of the trousers when actively moving

A stand-up collar with a zipper, the height increases smoothly to the back of the head. The lining is made of knitted fabric for comfort and sweat removal. The zipper is covered from the inside along the entire length with a strap trimmed with knitwear, a bend on top to protect the chin

Raglan sleeve — there are no seams on the shoulders, rubbing under the straps of the bulletproof vest

Articulated sleeve cut

Reinforcement of the elbows with pads of convex anatomical shape, Cordura® 320d fabric (100% nylon) without PU coating, durable breathable fabric

The possibility of installing protective polyurethane foam inserts inside the elbow reinforcements(included in the kit). The input for installing/removing inserts is located on the wrong side of the sleeve and does not use the usual Velcro for this purpose. This protects the pad from dirt getting inside and makes the holding of the inserts more reliable, there are fewer clinging parts

On the shoulders there are pockets with a vertical tractor zipper. The pockets are voluminous, with pleats at the bottom and back. Large Velcro fasteners for attaching chevrons (15x10 cm). At the bottom of the pockets there are swept loops for water drainage

The set includes two caps for the Velcro straps of the arm pockets-reciprocal Velcro, sheathed with the main fabric of the suit

Underarm inserts of a large area of knitwear for ventilation and sweat removal

Cuffs with Velcro patches. A minimum of extra layers of fabric on the wrists for comfort in hot weather

Velcro is sewn in a reinforced way

On all zippers there are comfortable grips made of braid

The main seams: on the knitwear are flat (they protect against chafing), on the NYCO fabric — a four-thread overlock with additional stitching for strength

Fixings-zigzags in loaded places

Material:

• Main material: NYCO Rip-stop, 50% cotton, 50% nylon.The density is 220 g/^m2. Standard mixed fabric for summer military uniforms. It surpasses the more common version of polyester and cotton in a number of parameters. With water-repellent DWR surface treatment
• Reinforcement: Cordura® 320d (100% nylon), density 155 g / ^m2, extra strong fabric, without PU coating on the inside (breathes), with water-repellent DWR surface treatment

• Knitwear until 2021: knitted fabric made of COOLMAX^®fibers with a cooling effect, high elasticity in two directions. Good abrasion resistance compared to many analogues used in combat shirts (UBACS, FROG, MASSIF ACS, etc.), 83% COOLMAX^®polyester, 17% elastane

• Knitwear after 2021: Kinetix Quick Dry Bamboo with long-term antibacterial treatment based on silver ions Silvadur™, 62% nylon, 28% bamboo charcoal, 10% spandex