Cordura® 500d Azimut gaiters

High durable gaiters made of Cordura® 500d fabric with PU coating. Designed to protect your feet from dirt, moisture and snow

Anatomical shape with a small margin in width, excess volume is stretched in several areas

Gaiters are available in three sizes, depending on the height, calf volume and dimensions of the shoes (S, M, L).When buying, it is recommended to try on gaiters directly on the shoes and layers of clothing intended for use

The vertical clasp is located in the front with an offset to the outside of the leg. The plastic tractor zipper is fastened from top to bottom, which allows you to remove the load from the lower section that is most susceptible to damage. The zipper lock is equipped with a convenient grip made of braid. On top of the zipper there is a protective strap with 25 mm Velcro in full height, metal ring buttons are located at the top and bottom at the corners of the strap

The top of the boot is pulled by an elastic cord with a Duraflex® retainer placed back. For convenience, the loop of the cord is equipped with a grip made of braid

There are two sewn elastic bands at the bottom of the back on the wrong side . The upper elastic band tightens the gaiters from behind in the ankle area, the lower elastic band with a non-slip thread woven in for a tight fit to the shoes

The entire lower part of the gaiters in front is reinforced with a second layer of Cordura® fabric to protect against wiping

The hook for fixing on the lacing of shoes, made of steel with oxidation for corrosion protection, is attached with two holnitenami

Stirrup made of nylon braid with a protective TPU coating (a complete analogue of the BioThane®sling). Unlike belts cut out of PVC material and High-fiber, such a stirrup does not have crumbling sections along the edges, which provides high wear resistance. The width of the stirrup is 25 mm for reasons of maintainability (the most common width of the sling in military and tourist equipment). The stirrup is sewn on the inside of the leg. The end of the stirrup is cut at an angle for ease of threading into the buckle. A plastic 25 mm double-slit Duraflex ® buckle is sewn on the outside of the leg. The extra end of the stirrup after the buckle is tucked into a cell made of a nylon sling

Fixings-zigzags in loaded places

Material: Cordura® (100% nylon) 500d, density 255 g / ^m2, extra strong fabric for sewing military equipment, PU coating on the inside, with water-repellent DWR surface treatment

Sling: 100% Nylon

Stirrup: 100% nylon braid with TPU coating

Threads: Liberty® bonded nylon filament

Plastic accessories: Duraflex®

Velcro: Alfatex®